91ÊÓÆµ

Photos: Unique office building takes shape

By: Sam Tenney//November 20, 2017//

Photos: Unique office building takes shape

Sam Tenney//November 20, 2017//

Listen to this article

A mixed-use office building taking shape in North Portland features a unique shape reminiscent of the iconic Flatiron Building in New York City. will consist of a ground-floor retail space and open office space on the upper floors. is the designer of the six-story structure, which Abbott Construction is building on a triangular lot at North Mississippi Avenue and Cook Street for developer Brandon Brown of .

The building’s first two floors are post-tensioned concrete slabs, with the upper four floors constructed of cross-laminated timber supported by glue-laminated beams. The CLT floors, sourced from in British Columbia, Canada, will be topped with a three-inch slab of poured-in-place concrete. Five concrete shear walls will provide lateral stiffness.

The building’s upper four office floors will each have a footprint of around 4,400 square feet, while the second-floor office space will measure around 2,400 square feet. The building also will feature a small parking garage at a half-floor below grade.

The 12-month core-and-shell project is slated for completion in March 2018.

Juan Toro, a carpenter with Timberland Inc., takes measurements in preparation for installation of a fourth-floor CLT panel.
Juan Toro, a carpenter with Timberland Inc., takes measurements in preparation for installation of a fourth-floor CLT panel.
Crews with Timberland Inc. fly a fourth-floor cross-laminated timber panel into place.
Crews with Timberland Inc. fly a fourth-floor cross-laminated timber panel into place.
Fernando Cazares, a carpenter with Timberland Inc., drills into a cross-laminated timber panel before it is sent into place.
Fernando Cazares, a carpenter with Timberland Inc., drills into a cross-laminated timber panel before it is sent into place.

1122_Flatiron_PDX_SA_04

Dallis Jensen, an ironworker with Timberland Inc., drills into a steel beam to anchor down a cross-laminated timber panel.
Dallis Jensen, an ironworker with Timberland Inc., drills into a steel beam to anchor down a cross-laminated timber panel.
Fernando Cazares guides a cross-laminated timber panel into place.
Fernando Cazares guides a cross-laminated timber panel into place.
Dallis Jensen, left, watches as Juan Toro guides a steel beam into place.
Dallis Jensen, left, watches as Juan Toro guides a steel beam into place.

1122_flatiron_pdx_sa_08_web

Juan Toro cuts a CLT panel down to size.
Juan Toro cuts a CLT panel down to size.

1122_flatiron_pdx_sa_10_web 1122_flatiron_pdx_sa_11_web



News

See All News

Commentary

See All Commentary

COMMUNITY CALENDAR